- Wheel.ru - automotive magazine

Many for a long time warm the car in winter, waiting for not so much engine warming, how much disappearance of muddy ynei on the inner surface of the windshield, interfere with start moving. Is it possible to get rid of the frost "Lobovik" from the inside? And let's do the experiment! Simple, like three rubles, and convincing, like a gopnik with a tape.

ПLeaving the car on the parking lot by frosty evening, we sometimes find it with a strongly frozen from the inside of the windshield. Wet air generated by snow-covered shoes, dry clothes and ever raw with many carpet, is distributed by the "stove" on the salon, and after turning off the engine condenses on the glasses and freezes on them with a white matte layer ... scrape this layer from the inside with a scraper or a plastic card. Even pleasure. And uncomfortable in thick winter clothes, and the frost rolls on the torpedo.

If there is no autorun, electrical heating of the windshield or the so-called "dry hair dryer" (the electric heater in the heating system, which gives warm air immediately after the engine start), it has to wait long to wait for the glass into the air from the stove. Even many gasoline engines are known for their "cold-bloodedness" and bad heating at idle. What to say about diesel engines! But to start moving limited visibility in the winter morning twilight is very unsafe.

People's way to combat glass frost from within an old, known and simple. Experienced drivers advise, having arrived in the parking lot, open the doors for a few minutes, quickly extinguished from the salon warm and crude air. This method is not always convenient. Often in the parking lot closely, and you cannot open the doors from two sides. Yes, and not always there is time and desire to do this. Imagine that you came late in the evening from work, pushing a couple of hours in a traffic jam ... Hardly you still want to put ten minutes for one minutes near the car instead of going home.

However, the car "Kulibins" believe that the problem is easy to overcome in almost automatic mode, if you leave in a muted and parked machine for half an hour, a working heater fan in cold air mode, which follows the "Lobovik". It will prevent the effect of condensation and freezing moisture on the glass.

But, of course, you do not need to leave the car with keys in the castle and after half an hour to resort to turn off the fan. The result is achieved using a simple introduction into the fan wiring and setting the disconnection delay timer. The ignition key is extracted, the machine is locked, and blowing continues to work and turns off automatically after 20-30 minutes. The fan in the first speed consumes not more than 3-4 ampere current, which, with a good and more or less fresh battery, is safe for the battery even in winter and does not get risks in the morning.

Such a "tuning" is designed for inexpensive mass cars with simple electronics. It is hardly possible to implement it on machines from the middle class and above, where the heater fan turns on after receiving it with an electronic unit of the whole complex of commands from different nodes and machine modules, or, let's say, if the switching command comes from the touch screen of the on-board multimedia system. But on "budgets", where blowing is included with a simple mechanical switch-switch, the implementation of such a timer is quite simple. It can look and connect it in about this way:

Turning off the fan_html_204e2211 delay

In a regular embodiment of the fan of the stove of the power "plus" power, it comes after turning the ignition key, after which the stove can be turned on and adjusted by the handle on the front panel.

In the finalized version of the power "plus" of food enters the fan through the relay directly from the battery, and the ignition key only performs the role of feeding the control command. As soon as the key turned, the relay worked, the power came, the fan is ready for inclusion. And after removing the key, the relay turns off with a 20-30 minute delay due to the timer.

Check whether the shutdown delay timer will be effective against glass frost. For this, we, however, have been launched to collect and connect it, but with a fairly high reliability, the work of the device "manually" was imitated, which, in fact, is quite simple.

Case wet and it's dry

We took two identical cars of one year of release, with minimal and close mileage, the same salons and new clean salon filters - that is, with almost identical conditions of initial humidity in the cabin. After all, if, for example, take one car without a run, and the second - pretty traveled under the owner, who did not too much for drying outdoor coverage, the result could differ.

Turning off the fan_html_1e5ca233 delay

On the front rubber mats of both cars, we laid paper towels, which spilled in a glass of water, imitating a humidity source that winter usually serves snow-covered shoes and crude clothing.

In the evening, both cars were launched in a 17-degree frost to the operating temperature of the engines. After that, the stoves for half an hour at the maximum temperature and maximum fan speeds warmed the salons - the air was directed to the windshield and to the legs.

Then both cars were drowned. The first - completely and immediately, and in the second, the work of the purge timer sounded: they left the ignition and the fan in the first speed, with the air flow directed to the windshield. After 20 minutes, the fan was turned off without opening the doors - by removing the terminal from the battery. After that, both cars left to freeze until the morning.

Fan shutdown delay_html_32d87367

Oddly enough, the purge timer really gave the promised result. The next morning in the car number 1, which was simply drunk, and whose salon cooled naturally, the windshield from the inside was covered with a layer of thick inlet. And in Machine No. 2, in which the heater fan turned off with a 20-minute delay, the glass remained clean! Car №2 will leave the parking lots much faster than the car number 1, whose owner will have to wait for visibility through the "Lobovik".

Delay in turning off the fan_html_m564cc3.

Of course, such a "collectozing" is unlikely to recommend to someone who carefully visits dealership service and has no skills, nor the desire to mess with electrical wiring and soldering iron. But those who have nothing to lose, "you can try.

Poll

Would you try such "collectozing"?

When windows freeze - it is not easy inconvenience, and the cause of a possible accident. The fact is that winter in the morning, most drivers, seeing that their windows were covered with frost, they would not spend a lot of time for high-quality cleaning. Having made a small window to see what happens ahead, they go to work, cottage or study.

Important! A limited review may cause an accident.

Due to limited review, the driver cannot notice the approaching danger in time and react. Moreover, in a critical situation it is very difficult to understand what you need to do when only the reflections of someone's headlights are visible in the side glass.

How to deal with freezing windows

frozen windows in autoIt is worth recognizing that modern vehicles are equipped with special equipment that easily copes with freezing windows. Move the windshield blowing devices are very popular. With the engine running, they will not give frost and chance.

Separately, you need to tell about the heating systems built directly in the glass. They are also able to fight freezing windows. The design itself is not too complicated, but its effectiveness is indisputable. Between two thin plates made of glass, electrically elements are installed almost inconspicable.

Important! Freezes windows in the open-air cars. If you put a car in a well-heated room, this will not happen.

To solve the problem, it first needs to be understood

frozen windows in auto

You must understand that the windows in the car freeze due to the temperature difference and high humidity. Consider the process in more detail. The temperature on the street is down. Also occurs inside the car. As a result, the existing moisture is crystallized and settles on the windows.

The raid, which is formed on the windows, not only prevents the review, but is also very sustainable for attempts to remove it. Moreover, if you show excessive zeal, you can harm the surface. Then without grinding and polishing it will not be possible to do.

Perhaps you have repeatedly wondered why the windows are freezing in the car? It's all about the unique properties of glass. The heat insulating coefficient of this material is very low. Especially if you compare this indicator with the indicators of other materials in the car.

Next, you need to remember the school course of physics. According to basic postulates, the reaction will take place with minimal energy costs. Simply put, condensate accumulates on the windows due to the minimum resistance to this process of the latter.

Oddly enough, but the windshield is frightened the most strongest. Provided, of course, that the car is not equipped with special heating devices. The fact is that the surface of the windshield is under the tilt, and this creates even more favorable conditions for the accumulation of frost.

Important! The windshield icing speed in the car also affects the snow dropping and settling on it.

Condensate, as the main reason is frost

Scheme

So, as mentioned above, the windows in the car freeze due to a decrease in temperature and moisture, which is in the air. But the root cause is all the same condensation. Exactly Water droplets that appear on the glass, as a result of evaporation, turn into ice crystals.

To understand the principle of the appearance of condensate, simply ride on the glass machine for a few minutes. It will immediately appear by the Spirit. Usually it disappears almost instantly, but if moisture is too much, and the temperature inside the cabin gradually becomes lower - frost will appear.

Important! Water droplets accumulate not only on the glass, simply because of the unique properties of their material here most.

To better understand why the windows inside the car freeze, consider the classical definition of condensation - this is a transition of a substance into a liquid or solid state of gaseous.

It is impossible to go around at the study of the phenomenon of freezing windows in the car such a concept as a dew point. It is often used in their work meteorologists. This is a certain temperature indicator in which air saturation is maximum. It is on this peak that condensate is formed.

Attention! The main reason for the appearance of condensate is high moisture content in the air.

Prevent freezing windows when setting a parking machine

In order for the machine to do not freeze the windows, you need to make the following manipulations before parking in the parking lot:

  1. So that the windows do not freeze, 5 minutes before turning on the alarm, open the glass and turn on the stove.
  2. Another effective method that makes it so that the windows do not freeze - align the temperatures. Pred departure Open the door for a few minutes. It would be enough.
  3. Make a mixture based on alcohol and glycerol (one to ten ratio) and wipe the windows.

These three methods will help the windows do not climb from the inside of the machine until you are.

High humidity in the cabin and how to deal with it

Salon auto

It is due to the high humidity freeze windows in the car. In most cases, the cause of high moisture content inside the cabin is the wet floor. When Winter on the street, you bring a little snow each time. Under the plus temperature, it melts and absorbs into the rug.

Over time, the car rug begins to accumulate more and more moisture. But over time, goes into a gaseous state, so as soon as the glasses soon. As a result, the windows of the machine freeze.

In fact, there are a number of methods that help effectively reduce the level of humidity in the cabin and do not give the glasses to climb. To begin with, before sitting in the car, it will not hurt to clean the clothes from the snow and knock him down from the shoe. Just before standing on the rug, knock on the road.

Unfortunately, you will not be able to completely avoid moisture in the cabin. Therefore, that the windows in the car do not freeze, periodically dry the rugs in the garage. Ideal if you have two sets of rugs.

The fact is that the drying of the rugs occupies a very long time. Even if you use the heater, put them back to the floor will be possible in 7-8 hours. Of course, drying is needed only to felt mats.

Attention! Always wipe the floor under the mats. Water often accumulates there.

Unfortunately, the snow-made is far from the only reason that can cause freezing windows. With the worst development of circumstances, the problem lies in the disturbed tightness of the heating system.

When a hole appears in the heating system, Tosol begins inside. To check this hypothesis, take the window with your fingers, which frozen. If your fingers stick, then the reason lies in the stove.

stove

To eliminate this reason for freezing the windows of the machine, you need to find a leak. After the diagnosis is carried out, and the defect is eliminated can simply wipe the glass and forget about this problem.

A faulty air conditioner filter can also be the reason why windows freeze. Due to the poor stream of air masses, moisture grows sharply in the cabin. As a result, frost on the glass.

No matter how strange it sounds, but the washing and cleaning do not always go to the machine for the benefit, especially in winter. It is not enough to dry the car's salon well and your windows will be frozen the next day.

Cleaning cars

Important! If you still decided to wash the car in the winter, take care of a really high-quality dryer. To do this, you can use not only a rag and garage heater, but also a construction hairdryer.

Tips to reduce the risk of freezing windows due to high humidity

To windows in the car do not freeze, you need to follow the following rules:

  1. In the cabin during movement, the air should constantly circulate, thanks to this, the windows will not freeze.
  2. So that the windows in the car do not freeze, use textile mats. Under rubber moisture constantly accumulates.
  3. The presence of climate control system allows preventing freezing windows.

Also that the windows in the car do not freeze, it does not hurt every morning to give the car to warm up. During the warming up, the snow accumulated on the windows is cleaned with a scraper.

What if the windows still frozen

Technical alcohol

If the windows in the car were frozen, you need to correctly return to them for the previous look. The main thing is not to use for cleaning the scraper. It easily deforms the glass from the inside, they harm him great harm. Microcracks appear on the surface, which in the future can lead to a violation of hermetic.

There are special chemical fluids that are able to help when the windows are frozen in the car. In the extreme case, you can use technical alcohol. Special tools are applied to the surface through the sprayer. As a result, the yoke acquires a jelly shape. After that, it is enough to take a conventional brush and remove the substance.

If you do not have the technical alcohol, but I don't want to spend money on special means. You can make an effective solution based on a simple salt. Just take a liter of water and add 2 tablespoons.

The resulting substance is also applied through a sprayer. In the absence of a sprayer, it is enough to take a simple rag and wrap the wet salt into it. Well enhances the mixture of glycerin.

RESULTS

So that the windows in the car do not freeze, it is necessary to monitor moisture. Moreover, before parking, it will not hurt to level the temperature inside and outside. There is also special equipment that ensures that by blowing.

Separately, you need to note the automotive chemistry. Special funds do not give the windows of the machine to freeze due to the formation of a protective film. It is also important to monitor the state of the floor. It must be dry.

Freeze glasses in the car from the inside: what to do, how to solve the problem?

In winter, the car suffers colossal loads. This is a road salt, cold oil in a crankcase, constantly discharged acb and other troubles. The owners of diesel car beyond other things are also encountered with difficult launch of the engine. After all, the fuel at low temperatures also freezes and falls into the sediment. But that unites the owners of diesel and gasoline cars, it is frozen glass in the car from the inside. What to do in this situation? Let's deal with.

Cause.

The cause of freezing is the accumulated condensate. Under the action of moisture temperatures begins to crystallize. As a result, a solid ice crust is formed on the inner surface of the glass. And with this problem, the owners face even after a long car parking.

Why moisture accumulates on glass? Everything is very simple. The material of this element has the lowest heat transfer coefficient. From the course of physics it becomes clear why the whole moisture settles on glass, and not on the upholstery of doors or rugs. The sources of condensate may be several. If glass freezes in the car from the inside, what to do on the VAZ-2110? It is necessary to eliminate the root of the problem.

Ventilation

Often condensate appears precisely because of the clogged ventilation channels. They are available throughout the perimeter of the car, including on the doors. On some cars, these channels are equipped with grids (like mosquito). Over time, dust and dirt are settled on their surface. As a result, the air flow does not circulate properly. And part of the moisture still remains inside the car.

Freeze glasses in the car from the inside: what to do, how to solve the problem?

What is the output from this situation? If the glasses freeze in the VAZ-2106 car from the inside, what to do? It is required to disassemble and clean all the ventilation channels. You should also pay attention to holes that are hidden in the trunk cavity. In the luggage compartment, moisture can also accumulate. And even though it will not be the reason for the early glasses, but will significantly reduce the service life of the metal. After all, as you know, moisture is the best friend of corrosion.

Wet or wet floor

This is another reason for which ice crust is formed on the windshield of the car in the winter season. The essence of the problem is extremely clear - the moisture remains on the surface of the rugs and, evaporated, falls on the surface of the glass. And it evaporates with the first inclusion of the salon pepper. Naturally, ride with open windows in winter will not work. You need to eradicate the source of the problem. How to do it? Before boarding the car you need to shake out the sole of snow. Yes, completely exclude moisture from entering the rug will not work. But after shaking the percentage of water in the cabin will be minimal. This eliminates the possibility of fogging glass with further icing. Experienced car owners advise not to use textile mats in the winter season. The most practical option is classic rubber. It is inexpensive, but will get rid of many problems with the winter operation of the car.

Depressurization of the stove

Especially often the owners of the domestic car of the Lada family are facing. How is this related to the formation of condensate? Due to the breakdown of the stove into the salon, the coolant can enter. Unlike snow, just a couple of milliliters of Tosola, so that the glass in the car is moving. At the same time, a fat raid will be formed on the surface. If glass freezes in the VAZ-2114 car from the inside, what to do? On the eve of winter, the stove revision should be conducted:

1) Clean the heater radiator from the dirt outside and rinse inside.

2) Replace solid nozzles on new, softer.

Freeze glasses in the car from the inside: what to do, how to solve the problem?

Exclude Tosola's drums should also be excluded because the pairs of this fluid are very poisonous. After a short trip, the driver can hurt the head, drowsiness and other adverse factors will appear. Nozzles should be installed on new clamps. By the way, in order to maximize the depressurization, the connection site is deceived by Litol. He will give a lighter shrinkage and prevent Tosla leakage.

Air conditioning

Few people know, but the air conditioner has its own filter. When it is contaminated, malfunctions are possible. And if in summer the wet air is excised in a couple of minutes, then in winter, when using an air conditioner remains for a long time. If glass freezes in the Lanos car from the inside, what to do? Before starting the winter, we carry out the air conditioner revision and change all the necessary filters. It also does not prevent the replacement of the salon cleansing element (not on all machines).

Washing

Any self-respecting car owner tries to support his "iron horse" in its pure form. In winter, on our roads it has to do more often. But the washing in such conditions can be dangerous not only by sticking seals, but also with a fading frontal. What is the reason? The problem is in moisture, which remained after washing. And with this problem even those who soap the car in boxing are faced with zero temperature.

Freeze glasses in the car from the inside: what to do, how to solve the problem?

The remaining moisture in the salon overnight turns into a solid ice crust on the front. What is the way out of the situation? If glass freeze in the car from the inside, what to do? Of course, not at all wash the car to the May warming is not an option. Experts recommend to air the interior of the car immediately after washing. And this is not in boxing (since the humidity is always 100 percent there), but on the street. It is enough to drive the car to the site and open the laser all the doors. After 10-15 minutes, it is possible to start everyday operation.

Freeze glasses in the car from the inside: what to do? Fast defrost

Of course, the surest way is to turn on the heater to the full and wait until it displays the windshield. But not always the drivers have so much time. After all, the stove is completely warming up only for 10-15 minutes drive, and at idle it will be even longer.

Freeze glasses in the car from the inside: what to do, how to solve the problem?

In addition, if the heater immediately turns on, the engine does not warm up, and it will not work in its mode (maximum - 60 degrees Celsius). But you can prepare a folk remedy. To do this, devastates the household wipers and pour a solution with salt and technical sports. 2 tablespoons of salt are added per liter of fluid. We spray composition on the surface and clean the dryer with a rag. The result exceeds all expectations. So, we found out why glasses frozen in the car from the inside, and what to do in this situation.

If the car is operated in the cold region of the country, then the owner of this car sooner or later will face the problem of freezing the stalk from the cabin. This phenomenon may have several reasons. Fortunately, many of them the driver can eliminate their own. Let's try to figure out how it is done.

Why glasses freeze from the inside

If the windows in the cabin are frozen from the inside, then the air in the cabin is too wet.

Glass on the car door was grouped from the inside

Car windows frozen due to high humidity in the cabin

Therefore, when the temperature in the cabin drops, water is distinguished from the air and settles on the windows, forming condensate, which, at a negative temperature, turns quickly into flash. Consider the typical causes of condensate:

  • Salon ventilation problems. Everything is simple: in the cabin of each car there are holes for ventilation. These holes can overcome these holes. When there is no ventilation, the wet air can not leave the cabin and accumulates in it. As a result, the separation of condensate begins on the glasses, followed by the formation of ice;
  • Snow gets in the cabin. Not every driver cares about how to smoke shoes, sitting in winter in the car. As a result, the snow turns out to be in the cabin. It melts, staining on rubber mats under the feet of the driver and passengers. A puddle arises, which gradually evaporates, increasing the humidity of the air in the cabin. The result is the same: Focus on the windows;
  • Various types of glass. Salon windows of various brands on wet air are frozen in different ways. For example, the glass brand "Stalinit", which is installed on most of the old domestic cars, frosts faster than the Triplex brand glass. The reason in different heat conductivity of stalks. At the Triplex inside there is a polymer film (and sometimes even two of them), which must restrain the fragments, if the glass breaks. And this film slows down the cooling of the glass, so even with a very humid cabin, condensate on the Triplex is formed later than "Stal"; Glass "Triplex"

    Two types of glass "Triplex" with a polymer film, slowing the frost

  • Fault of the heating system. This phenomenon is particularly often found on classic VAZ cars, the heaters in which were never distinguished by good tightness. Most often in such machines, the tap of the stove flows. And since it is located almost under the glove compartment, antifreeze arising from there turns out under the legs of the front passenger. Further, the scheme is still the same: a puddle is formed, which evaporates, moisturizing air and causing brake friction;
  • Car wash in the cold season. Typically drivers wash the car in late autumn. During this period, the dirt on the roads is much, the snow has not yet fell, and the air temperature is already low. All these factors lead to an increase in humidity in the cabin and the formation of internal land, which is especially noticeable in the morning when the car is in the parking lot and has not soldered.

How to eliminate brake frost

To prevent the frost of the brake, the driver must somehow reduce the humidity of the air in the cabin, passing away from the already formed toes. Consider the solution solutions.

  1. The most obvious option: Open the doors of the car, thoroughly venting out the interior, then close it and turn on the heater to full power. Give the heater to work for 20 minutes. In most cases, it solves the problem.
  2. If the machine is installed on the machine heated, along with ventilating and the inclusion of the heater, heated should be used. Fasting from the windshield and rear window will disappear much faster. Glass with heated

    The inclusion of heating of the glass allows much faster to get rid of the land

  3. Replacing mats. This measure is especially relevant in winter. Materials are installed on the place of rubber mats. At the same time, the rugs are as possible that the moisture from the boot absorbed into them as quickly as possible. Of course, the absorbency of any rug is limited, so the driver will have to systematically remove mats and dry them. Otherwise, the glass will begin to freeze again. Different mats in the cabin

    Materia dilated mats in winter preferably standard rubber

  4. The use of special compositions. The driver, finding frown on the glass, is usually trying to loosen it with some scraper or other submitumed tool. But so you can damage the glass. It is better to use fluid to delete land. Now there is a mass of compositions sold both in conventional bottles and in spraying cans. Buy better spray can, for example "Eltrans". The second most popular composition is called Carplan Blue Star. Means "Eltrans"

    The most popular assessment agent "Eltrans" combines convenience and democratic price.

Folk Methods of Fighting Oblaning

Some drivers prefer not to spend money on all sorts of tricks, but enjoy to eliminate land with proven drainage methods.

  1. Homemade fluid against land. It is preparing very simple: an ordinary plastic bottle with a sprayer is taken (for example, from the wiper). An ordinary table vinegar and water is poured into the bottle. The ratio: water is one piece, vinegar - three parts. The liquid is thoroughly mixed and the slim layer is sprayed on the glass. Then the glass should be wiped with a thin cloth. This procedure is best carried out before leaving the car in the parking lot at night. At the moment in the morning it is not necessary to mess around with grinding stalks. Table vinegar

    An ordinary table vinegar, mixed with water one to three, gives good icing fluid

  2. Use of salt. 100 grams of ordinary salt wrapped in a thin rag or napkin. With this cloth, from the inside, all the glands in the car's cabin are wiped. This method is inferior on the efficiency of the self-made liquid, but for some time and it can hold back icing.

Video: Overview of various means against stamps

So, the main problem causing the icing is high humidity. It was on this problem that the driver must focus if he does not want to constantly scratch the windshield of ice pieces. Fortunately, in the overwhelming majority of cases, it is enough just to change the mats in the car and it is pretty able to ventilate it.

Alexey StepanovCopywriter with five-year experience. Rate article:

(15 votes, average: 4.2 out of 5)

Share with friends!

Why does windshield frozen from the inside freezes?

Most modern cars are equipped with windshield heating systems by blowing the surface with warm air. With the engine running and a good heating system, the glazing does not freeze and does not face. Special windows with a built-in electrical heating system are considered more efficient.

Structurally, such glazing consists of two plates, between which the tooth tires are mounted. However, no matter which windshield or which heating system is installed on your car, the probability of glazing icing during the parking lot with a negative temperature always exists, as well as the probability that the windshield is free from the inside. First of all, this problem is relevant for those who have a car in winter on open areas.

The main reason why the windshield freezes from the inside, lies in high humidity inside the car. When the air temperature drops in the cabin after turning off the engine, there is a change in the physical state of the fluid, which is present in the air as a steam. From a vapor state, it gradually goes into a solid state (crystallizes) and settles in the form of an inlet on the windows. To prevent icing, first of all, it is necessary to check the condition of the salon and the systems of the car for the formation of high humidity. Finding and eliminating the cause, you can minimize the probability of freezing windshield from the inside.

Full size

Causes of high humidity inside the cabin

Wet floor. First of all, if the windshield freezes from the inside, it means that the floor of the salon is wet. In winter, the moisture falls into the car in the form of snow on clothes or shoes. In the heated cabin, the Tala liquid evaporates first, and then after cooling it settles on a colder glazing. To avoid the freezing of the glass, it is necessary to pull the mats more often and dry the salon. At the same time, special attention is paid to the floor coating. Tosol. If the heating system is violated, Tosola leakage is possible. First of all, the fluid can leak into the salon from the stove. The easiest way is to check it out, take it off. If there is a leakage, the glazing surface will be sticky. Tosol pairs after cooling are concentrated primarily on glazing in the form of a transparent film. In this case, so that the windshield does not freeze, it is necessary to first eliminate the leakage of the fluid from the heating system, and then wipe the glazing. The air conditioning system. The cause of high humidity in the cabin can be clogged by salon filters or blockage of ventilation decisions of the air conditioning system, which lead to a violation of air exchange. In this case, you should replace the filter or clean the air ducts. Water. Too frequent sink without proper drying can also be the cause of high humidity inside the cabin. Therefore, after washing, it is recommended to dry well by drying the car, including the salon. According to what reasons, the windshield is frozen? Lob's icing is due to the fact that the glazing with the engine turned on and the working air conditioning system is always warm. After turning off the engine, the windows begin to cool. Since the windshield is installed under the tilt, the process of its cooling occurs faster compared to the rest of the glazing. If it is snow, then the decrease in the temperature of the glass surface occurs even faster. As a result, the moisture pair, which are present inside the cabin, turn into an ice crust and primarily frosts the windshield from the inside.

To prevent ice formation on glazing, experts recommend to cool the windshield before turning off the engine, sending a cold air stream on it. In addition, it is necessary after turning off the engine open the doors and equalize the air temperature in the cabin with the environment for 5-10 minutes. How fast to defrost the windshield?

Solving the problem of rapid elimination of windshield icing is worried almost every driver in winter. This is especially true for those who have a car in the parking lot. Leaving the heated car in the evening in the evening, you will find the ice (frost) on the windows in the morning. The intensity of icing will depend not only on atmospheric conditions, but also from the state of the car. If in the cabin for any reason high humidity, icing at a negative temperature in any case can not be avoided. And in order to defrost the windshield using a regular heating system will have to spend a lot of time, burning precious fuel.

Options of fast defrost

There are many ways to quickly defrost the windshield. However, not all of them are effective and safe. Much believes that the simplest method of eliminating ice from the windshield, to remove the frozen with a scraper or pour hot water. Immediately note that these procedures lead to the appearance of microcracks on the glazing surface. This subsequent can cause glass destruction.

Technical alcohol. According to the experience of experienced masters, it is possible to quickly defrost the windshield using a technical 90% alcohol and a conventional plastic sprayer. After processing the ice on the windshield almost immediately turns into a jelly-like state. I remove this "crawler" with a brush or cloth in a few minutes, you can immediately go on the way after the engine warming. Chemical drugs. You can also use various chemical compounds to quickly defrosting the glass, which today are presented in a large assortment at any household chemical store. However, not all of these drugs are effective, so it is worth the choice more carefully. How quickly defrosting the windshield

Salty water. If at this moment you have no special fluids for defrosting at hand, you can use the old proven tool - salt water. In one liter of warm water, we stir 2-3 spoons of salts and pour the solution into a regular sprayer. Abundantly splashes on the icing surface, and then remove the remains of the ice with a rag. At the same time, it is necessary to avoid salty solution to seals and plastic. Soleb tampons. If you do not have a sprayer, you can make tampons, wrapping "Cashitz" from salt into a rag, and then flush the ice on the glass. After defrosting the glazing, do not forget to wipe the glass with a clean cloth. Al and glycerin. Eliminate the frost on the glass from the inside with the help of a glycerol solution. For its preparation, you will need two parts of the glycerol, one part of the cook salt and the usual sprayer. For preventing stalking, if your car is on an open parking lot, it is recommended to use polyethylene covers.

How to quickly defrost windshield

Such protection can be made independently or buy a complete set in the store. The film will prevent the formation of Inea, and you do not have to defrost in the morning. If there are no films, as a last resort, try to close the windshield with any other material. At the same time, do not forget to pre-level the air temperature in the cabin with the environment. If you do this, then with any frost, icing will be minimal.

Thank you for reading to the end!))

More useful information can be found

In the car public VK [in] Auto! Sign up!

So that the glasses do not freeze in the car

What if the windows still frozen

If the windows in the car were frozen, you need to correctly return to them for the previous look. The main thing is not to use for cleaning the scraper. It easily deforms the glass from the inside, they harm him great harm. Microcracks appear on the surface, which in the future can lead to a violation of hermetic.

There are special chemical fluids that are able to help when the windows are frozen in the car. In the extreme case, you can use technical alcohol. Special tools are applied to the surface through the sprayer. As a result, the yoke acquires a jelly shape. After that, it is enough to take a conventional brush and remove the substance.

If you do not have the technical alcohol, but I don't want to spend money on special means. You can make an effective solution based on a simple salt. Just take a liter of water and add 2 tablespoons.

The resulting substance is also applied through a sprayer. In the absence of a sprayer, it is enough to take a simple rag and wrap the wet salt into it. Well enhances the mixture of glycerin.

Freeze glasses in the car from the inside what to do fast defrost

Of course, the surest way is to turn on the heater to the full and wait until it displays the windshield. But not always the drivers have so much time. After all, the stove is completely warming up only for 10-15 minutes drive, and at idle it will be even longer.

In addition, if the heater immediately turns on, the engine does not warm up, and it will not work in its mode (maximum - 60 degrees Celsius). But you can prepare a folk remedy. To do this, devastates the household wipers and pour a solution with salt and technical sports. 2 tablespoons of salt are added per liter of fluid. We spray composition on the surface and clean the dryer with a rag. The result exceeds all expectations.

So, we found out why glasses frozen in the car from the inside, and what to do in this situation.

Going in the morning to your car in winter, many of us have come across such a situation as a very frozen windshield. As a rule, we expect to get out of the house and a little warming the car to go on the road. But, unfortunately, we often lose a lot of time, in order to melt the resulting ice on the windshield. Often, in order to completely clean the glass from ice, we lose a lot of time.

Today we offer you an easy way that will help protect the windshield from the formation of a large amount of ice. So what should I do if the windows often freeze the glass?

Many of us with the problems of freezing glasses should cope in different ways. Someone uses special scrapers (often by credit cards) to help remove ice. Someone is trying to melt the ice with hot water (it is not possible to do it categorically) or other liquids. But all these methods do not help too quickly to clean the glass from the land, and some of them are fraught with damage to the car.

In order not to freeze the windshield of the car. It is necessary on the eve of the evening to treat the windshield with a simple vinegar that protects the glass from ice formation, which will save you the next day not enough time. Watch all more. In order to prevent the freezing of windshield, as well as side windows you need several inexpensive materials that are practically in every home or in any store: a rag, a plain white vinegar, a plastic spray bottle (bottle with a sprayer) and simple water. 1) Liquid for protection of glass from freezing

In order to protect the glass from freezing, it is necessary to handle the glass with a special fluid to the night, which can be simply made independently. To do this, take an empty plastic bottle with a sprayer (for example, you can use an empty bottle from the glass cleaning agent), the rank of non-diluted vinegar in it. The required proportion for high-quality fluid: three parts of vinegar and one part of the water. 2) Treat car glass from freezing so that the frozen windshield does not take a lot of time from the morning, which often becomes caused to be late for work, etc., treat the windshield cooked liquid and other glasses if necessary. After that, wipe the surface of the glass with any cloth. Treating, so the windows of the car you protect them from the formation of a large amount of ice, which for a long time it is necessary to quarrel when heating the car. 3) Regularly protect the glasses from icing

If you are in a strong frost in the evening you will handle the anti-icer or your own cooked liquid, then in the morning you will not lose much time in order to remove the resulting ice. Even in a strong frost, the liquid will protect the surface of the glass from a strong freezing. And if after all, it is formed to flash on the glasses, it will be much easier to remove than without processing. Also, if you could not or forgot to process the glass in the evening, then in order to accelerate the thawing of glasses, you can handle the glass immediately before warming up or while warming up the car. Liquid will help speed up the thawing process. 4) What is your liquid better purchased?

What to do if the glass is still frozen

It is best to immediately contact the specialists. They will help identify problems and eliminate them. If you do not have time, forces, desire, and perhaps money, you can try to fix the situation yourself. Now a large number of different liquids are sold, mainly on the basis of alcohol. But unfortunately, not all of them are effective. And the smell of alcohol in the car does not have everything like everyone, and if the traffic police officer stops you, then you will prove to him for a long time that it smells not from you, but from the glasses.

On the Internet, there are many forums and discussions on this topic. Who only does not advise anything, but sometimes there are also standing recommendations. For example, cover the windows with a blanket or leave one partitioned one. But if there is snow on the street, then this is not an option, and also if you leave the car under the entrance, then the opening window is a big risk. Yes, and the blanket can be filmed.

A good way to solve the problem is the leveling of temperatures inside and outside the cabin. For this, before becoming in the parking lot, turn off the stove for several minutes and open the door or window. You can also mix in the proportion one to one alcohol with glycerin and wipe these windows. Because you will not all be in the car, and the windows will not freeze, it can help you.

You can not freeze the windows once and forever getting rid of condensate. Well, about the mounted snow you already understood - dry, wipe. But the reason for condensate may be hidden in the fact that the tightness of the heating system was disturbed. To understand this or not, take it with a hand frozen glass, if it sticks, then the problem is still in the heating system. To remove this problem, you need to find this problem yourself or with the help of the wizard find the flow. As soon as you eliminate it, everything must be improved. Another reason may be broken air conditioning or its filter. When the air flow moves incorrectly, humidity increases and as a result of this condensate appears.

In the cold season, wash the car is harmful, because without drying the windows to the end, you can again freeze them.

In order to solve the condensate problem, you can use folk tips. Old Dedovsky way - the use of ordinary salt. Wrap it in the fabric and wipe the windows inside. And you can add salt to water and sprinkle the windows from the spray gun. This will help keep them without ice more time. You can also leave various lining or Silica gel bags in the cabin, which will absorb excess moisture.

The main rules are reduced to the following factors:

  • A well-working system of air conditioning and ventilation in the car is a guarantee of correct air circulation and as a result of a reduction in condensate.
  • Properly selected mats in the cabin. It is better for the cold season of the year to choose mats from the fabric, as the rubber accumulate by moisture.
  • Warming a car in the morning and cooling it in the evening before parking will also help reduce the risk of freezing windows.

If windows, despite all precautions, frozen, then it is necessary to easily free them from ice. Better not to use scraper for these purposes, because it can damage the glass of your vehicle

Now there are a lot of various special funds, with which you can easily clean the car. And the alcohol refers to the same folk remedies. If neither one nor the other is at hand, then you can independently prepare a salt solution - to get 2 tablespoons of salt on a liter of water, mix and sprinkle on the windows. Such simple advice will help you prevent freezing windows or get rid of it.

What to do when freezing glass

When identifying a malfunction, you must immediately contact the workshop, and eliminate the error. Otherwise, you can not only get fogging, but also get a swamp on the floor of a car that will be difficult to dry in winter.

If the freezing of the glasses is worried about, and there is no time or the dampness of the salon is not able to remove, you can use in various ways and means. It includes all sorts of liquids and, as a rule, they are based on alcohol with different flavored additives.

The means, of course, really help, but unfortunately not all. You may have to buy a little, before you find it really effective.

Also, the presence of alcohol, as a rule, is felt for a long time and when checking the documents by an employee of the road inspection, an ambiguous situation may arise.

And the outsiders in the cabin can lead to a banal headache that will interfere with the operation of the vehicle.

There are not so many ways to eliminate freezing, if you exclude the above, then several will remain the most common. The first and proven option is to leave any window a bit open.

This method really helps, but provided the car parking in the courtyard of multi-storey houses or during heavy snowfall is not an option. The second, more Dedovsky, but working - you need to find any blanket and just cover the windshield.

It helps, as a rule, only for windshield, since the lengths are not enough for everyone, if only in the trunk does not lie on the entire car. The third way is interesting and effective, but for its implementation you need to leave women's hygienic gaskets in the cabin and preferably as close as possible to problem places.

Of course, the amazement of passersby will not know the boundaries at the sight of the salon miracle, but the glasses will still be clean and dry - as in advertising. Use tips with the mind and keep the windows with clean and tidy.

Good luck on the roads.

The article is written on the materials of the sites: Cars-bazar.ru, Autoflit.ru, Vremya-Sovetov.ru.

How to deal with freezing windows

It is worth recognizing that modern vehicles are equipped with special equipment that easily copes with freezing windows. Move the windshield blowing devices are very popular. With the engine running, they will not give frost and chance.

Separately, you need to tell about the heating systems built directly in the glass. They are also able to fight freezing windows. The design itself is not too complicated, but its effectiveness is indisputable. Between two thin plates made of glass, electrically elements are installed almost inconspicable.

IMPORTANT! Freezes windows in the open-air cars. If you put a car in a well-heated room this will not happen

Depressurization of the stove

Especially often the owners of the domestic car of the Lada family are facing. How is this related to the formation of condensate? Due to the breakdown of the stove into the salon, the coolant can enter. Unlike snow, just a couple of milliliters of Tosola, so that the glass in the car is moving. At the same time, a fat raid will be formed on the surface. If glass freezes in the VAZ-2114 car from the inside, what to do? On the eve of winter, the stove revision should be conducted:

  • Clean the heater radiator from the dirt outside and rinse inside.
  • Replace solid nozzles on new, softer.

Exclude Tosola's drums should also be excluded because the pairs of this fluid are very poisonous. After a short trip, the driver can hurt the head, drowsiness and other adverse factors will appear.

Nozzles should be installed on new clamps. By the way, in order to maximize the depressurization, the connection site is deceived by Litol. He will give a lighter shrinkage and prevent Tosla leakage.

So what to do

The most obvious method of cleaning glass from ice is physical. That is, it's easy to lose the frozen glass with a special scraper or plastic brush nozzles. The method is quite valid and simple, but there is a nuance. In order not to damage the glass, it is best to start it slightly "to warm up". That is, just start the engine and wait until the "stove" earns. Then you will be easier to scribe, and damage will be avoided.

The second method of cleaning glass from ice is closely connected to the first. The only difference is that before using the scraper, you apply a special fluid to ice - glass defrost. Such a means is sold in almost every store and is not so expensive. We strongly recommend that you buy it! You will be surprised how easy it is to remove the ice.

However, if there is very little money, or they simply do not want to spend, one more tool will suit. The fact is that the defrostator can be made by himself. Just mix the table vinegar with water in the proportion of 3 to 1, and splash on the glass as well as in the case of a conventional defrost. You will not believe it, but it works too! If there is no vinegar, then you can mix with water with a conventional cook salt. True, note that salt will naturally influence both paint and varnish and rubber parts - brushes and seals. That is, it is better not to abuse.

If it happened that you do not have any devices at all, just start the motor, turn on the maximum blowing windshield, be sure to - air conditioning, and leave the car. Yes, this method is the longest, and you will have to wait on the street for a while (so as not to breathe inside and speed up the process). But after about 15-20 minutes, you are guaranteed to go on the road - it is better than moving with a bad overview.

Finally, the most effective way to protect against ice crust is the windshield with heating. But everything is clear here - this option is either in the car there or it is not. You can't install such a glass yourself.

The problem of freezing side windows and car mirrors

You can not refer to the fact that in the courtyard of the twenty-first century - manufacturers of auto chemicals thought about the unfortunate vehicles without heating mirrors and began to produce so-called glass defrosts - sprinkle bottles: watering the elevated mirror from it - and it is very fast, literally in minutes, thaws. The only minus of this miracle means is a specific smell, but you will agree that for the sake of achieving the goal, you can suffer a little. The main thing should be remembered that it is extremely not desirable to use the defrostor inside the car's cabin, for example, if not only the mirrors are zaled, but also the windshield.

What to do if the glass is still frozen

It is best to immediately contact the specialists. They will help identify problems and eliminate them. If you do not have time, forces, desire, and perhaps money, you can try to fix the situation yourself. Now a large number of different liquids are sold, mainly on the basis of alcohol. But unfortunately, not all of them are effective. And the smell of alcohol in the car does not have everything like everyone, and if the traffic police officer stops you, then you will prove to him for a long time that it smells not from you, but from the glasses.

On the Internet, there are many forums and discussions on this topic. Who only does not advise anything, but sometimes there are also standing recommendations. For example, cover the windows with a blanket or leave one partitioned one. But if there is snow on the street, then this is not an option, and also if you leave the car under the entrance, then the opening window is a big risk. Yes, and the blanket can be filmed.

A good way to solve the problem is the leveling of temperatures inside and outside the cabin. For this, before becoming in the parking lot, turn off the stove for several minutes and open the door or window. You can also mix in the proportion one to one alcohol with glycerin and wipe these windows. Because you will not all be in the car, and the windows will not freeze, it can help you.

You can not freeze the windows once and forever getting rid of condensate. Well, about the mounted snow you already understood - dry, wipe. But the reason for condensate may be hidden in the fact that the tightness of the heating system was disturbed. To understand this or not, take it with a hand frozen glass, if it sticks, then the problem is still in the heating system. To remove this problem, you need to find this problem yourself or with the help of the wizard find the flow. As soon as you eliminate it, everything must be improved. Another reason may be broken air conditioning or its filter. When the air flow moves incorrectly, humidity increases and as a result of this condensate appears.

In order to solve the condensate problem, you can use folk tips. Old Dedovsky way - the use of ordinary salt. Wrap it in the fabric and wipe the windows inside. And you can add salt to water and sprinkle the windows from the spray gun. This will help keep them without ice more time. You can also leave various lining or Silica gel bags in the cabin, which will absorb excess moisture.

How not to make frozen side windows and mirrors

If you do not want to spend money on similar brand defrosts, you can use the usual alcohol in this capacity - pour it into the spray and ready for use. However, it is necessary to apply this fluid only after preliminary cleaning of the flashes on the mirrors. A few minutes - and you can go. By the way, in order not to be especially not tormented, you can simply - it's time to wipe the mirrors with alcohol - the result is the same, by the way, in addition to the alcohol, rub the mirrors can also be acetic essence.

Another recipe is known to the rallying of the mirrors - half of the liter of the concentrated aqueous solution of the cook salt, it is necessary to mix with one liter of light glycerol. After this mixture, it is necessary to apply a thin layer on the inner surface of the glass, this will prevent ice appearance on it for several hours. Of course, such a wonderful liquid has a very long validity period, but trouble can be avoided for some time and get to the destination destination and intention.

You can try to hide the mirrors in a simple way - bring the car to the operating temperature so that the stove began to warm, send the stream of hot air through the open glass towards the mirrors. Just be careful - too hot air caught on a cold surface can lead to the fact that the mirror simply crashes. Of course, this method is a bit painstaking, but the result will be visible, however, as the situation on the road through the mirrors.

Another unusual way to avoid sleep on the mirrors - before locking the car and leave it in the cold, put on the mirrors ordinary warm socks. Thanks to this, the mirrors will not freeze. A little noncainstly looks like your car, but the goal will be achieved.

Freeze glasses in the car from the inside, what to do? With such a problem, many Russian motorists faced with such a problem. Our climate is famous for low temperatures in winter, so each driver faces the problem of frozen windows.

In addition to the negative aesthetic side, this may entail unpleasant consequences in the form of accidents. Because due to a bad review, the driver is more difficult to see the danger. And every morning to start with cleaning or heating of all frozen windows is simply unreal. That is why many motorists are interested in a very winter question - when the glasses frozen in the car from the inside, what to do? After all, everything is clear why glass freezes outside.

3 Regularly protect the glasses from icing

If you are in a strong frost in the evening you will handle the anti-icer or your own cooked liquid, then in the morning you will not lose much time in order to remove the resulting ice. Even in a strong frost, the liquid will protect the surface of the glass from a strong freezing. And if after all, it is formed to flash on the glasses, it will be much easier to remove than without processing.

Also, if you could not or forgot to process the glass in the evening, then in order to accelerate the thawing of glasses, you can handle the glass immediately before warming up or while warming up the car. Liquid will help speed up the thawing process.

To solve the problem, it first needs to be understood

You must understand that the windows in the car freeze due to the temperature difference and high humidity. Consider the process in more detail. The temperature on the street is down. Also occurs inside the car. As a result, the existing moisture is crystallized and settles on the windows.

The raid, which is formed on the windows, not only prevents the review, but is also very sustainable for attempts to remove it. Moreover, if you show excessive zeal, you can harm the surface. Then without grinding and polishing it will not be possible to do.

Perhaps you have repeatedly wondered why the windows are freezing in the car? It's all about the unique properties of glass. The heat insulating coefficient of this material is very low. Especially if you compare this indicator with the indicators of other materials in the car.

Next, you need to remember the school course of physics. According to basic postulates, the reaction will take place with minimal energy costs. Simply put, condensate accumulates on the windows due to the minimum resistance to this process of the latter.

Oddly enough, but the windshield is frightened the most strongest. Provided, of course, that the car is not equipped with special heating devices. The fact is that the surface of the windshield is under the tilt, and this creates even more favorable conditions for the accumulation of frost.

Important! The windshield icing speed in the car also affects the snow dropping and settling on it

Making a velochet of car windows with your own hands

To save your blood, but get a good tool for defrosting the windows of the car, you will need only five minutes of time and three components.

So, recipe!

We take one part of the alcohol and two parts of the water, after which this composition add a few drops of detergent for fragrances, so to speak. All thoroughly mix and pour into the sprayer. The sprayer itself can be bought or use some suitable bubble from female cosmetics. In addition, you can use the container from under some cleaning agent, which has a sprayer. In general, today it is not a problem.

Option number two. The alcohol can be replaced by conventional vodka, but at the same time the water needs to pour less, as in vodka alcohol less than in pure alcohol.

Third option. We buy a regular winter washer for the windshield of the car and pour it into the sprayer, after which we use as a defrost to the glasses. The fact is that as part of the washer just contains alcohol, which actually does not give it to freeze in the winter and effectively fight with outflow on the glasses.

Someone will think why then need a sprayer, splash the washer, and that's it? In principle, as an option, however, not quite. The fact is that not all auto injector washer fans and spray the washer evenly on all the glass is once. Secondly, when you spray the washer work the bruthes of janitors, and this is not good, as they will wear out during the friction on the ice, and the glass itself will suffer from it. Among other things, you will have to "rape" the motors of the washer, and the very washer in this case will go too much. Also note that in this case you will not be able to defrost the remaining glasses.

Fourth velochet version. We take a glass washer and add alcohol into it in proportion three parts of the washer to one part of the alcohol. After that, you get a very effective tool that will effectively defrost glass and you do not have to mess with water and detergent.

The fifth option is "on the extreme". Why "Richnyak"? Because this option, or rather options, have drawbacks, so you need to use them exclusively in extreme cases. So, if for some reason you have not been at hand neither alcohol, no vodka, no washer, try to find at least salt or vinegar and water, preferably warm.

  • Recipe first - with salt. We take a lot of salt, 5-7 spoons and pour it into 2-3 liters of water, preferably warm, because it will be easier to dissolve salt. When salt is dissolved, wait until the water cools. Voila, now you have a cheap, but at the same time reliably tool to combat ice. The disadvantage is that the salt, getting into body, as well as rubber parts, negatively affects them, so I do not recommend using such a tool regularly, solely in extreme cases!
  • Recipe second - vinegar. We take three pieces of vinegar and one part of the water, mix and get a refrigerant of glass production. Again, I want to recall that this method should also be used only in very emergency cases, since vinegar is an acid-containing substance, therefore it is capable of negatively affect LCP and body parts. It is also not known how rubber and plastic will behave.

Finally, I want to remind the fact that if you have frozen the windshield, in no case do not use hot water! Due to the temperature drop glass, most likely burst, remember it.

Text: avtopulsar.ru.

Why glasses freeze in the car and how to fix it

To eliminate this attack, it is necessary to figure out what happens with the air in the cabin, which, with a decrease in temperature, leaves condensate on the glasses and at a minus temperature freezes.

In each car there are constructive ventilation holes for air circulation and often they are clogged both outside and inside. In the absence of ventilation, the cooled air is nowhere to go out and the effect of the thermos.

Attention! To eliminate or check ventilation, you must contact the maintenance service. There is also the opposite side of the medal when there are too many ventilated places in the car, it can be associated with damaged door seals, windows wear or loops in the door

There is also the opposite side of the medal when there are too many ventilated places in the car, it can be associated with damaged door seals, glasses, wear of locks or loops in the door.

With increased outdoor air intake, the car's salon is very quickly cooled, and the air with rapid cooling condenses the dew on the glasses. These faults can also be checked when the car is diagnosed in the car service.

In addition to faults of the vents of the car, there are also many factors of its care and operation. In winter, it is usually present on the street in the street, which is safely entered along with the footwear in the car's salon, because it is not possible to fit the snow from shoes all the time.

This snow is quickly melting and in the form of water and hits the cabin mats. It all depends on the driver, which rugs it uses in winter. If rag, then this material, even rubberized, perfectly absorbs moisture, with frequent exit and entering the car These mats can gain a large number of melting snow and do not have to sleep.

Accordingly, after setting the car to the night parking, the heated rug continues to dry and evaporate moisture into the cabin air, and then on the old scenario, the air cooled, fell into the dew on the glasses, the glasses were covered with inheree and in the morning.

It is possible to correct this effect with the help of rubber rugs that do not absorb moisture, but may not be a lot of discomfort, when the moisture is accumulated from snow, they can collect a small puddle in their feet.

Therefore, it is necessary during the operational day sometimes pull them out and wipe the cloth, and this is not particularly convenient. Also, the same actions are preferably carried out before night parking.

Furning and further frost from the inside of car windows can be associated with the faults of the cabin heater system. It just appears a little leakage, like windows sweat in the cabin, this cause is easily recognized by the characteristic smell of antifreeze.

Tips for reducing the risk of freezing windows

The main rules are reduced to the following factors:

  • A well-working system of air conditioning and ventilation in the car is a guarantee of correct air circulation and as a result of a reduction in condensate.
  • Properly selected mats in the cabin. It is better for the cold season of the year to choose mats from the fabric, as the rubber accumulate by moisture.
  • Warming a car in the morning and cooling it in the evening before parking will also help reduce the risk of freezing windows.

If windows, despite all precautions, frozen, then it is necessary to easily free them from ice. Better not to use scraper for these purposes, because it can damage the glass of your vehicle

Now there are a lot of various special funds, with which you can easily clean the car. And the alcohol refers to the same folk remedies. If neither one nor the other is at hand, then you can independently prepare a salt solution - to get 2 tablespoons of salt on a liter of water, mix and sprinkle on the windows. Such simple advice will help you prevent freezing windows or get rid of it.

Remove outside

There are just a couple of grandfathers that work so far. The first - This is the leveling of temperature.

How do you do it without a difference. The wasting engine - turn off the stove - omit the glass (two front or all four) - open the doors. The main thing to stand, so a couple is the top three minutes (this is enough) so that the warm air is released. And all! Freeze glasses will be at times less.

If you stand so, there is no desire - the guys on the parking lot. You can lower one side glass overnight, not much, let's say with 5 mm (just leave a crack).

Warm air according to the laws of physics will be released through it, the temperature balance is leveled with the street - again the glass will freeze much smaller. BUT! This method is relevant only on a well-protected parking (do not tempt thieves)

Washing

Any self-respecting auto owner tries to support his "iron horse" in its pure form. In winter, on our roads it has to do more often. But the washing in such conditions can be dangerous not only by sticking seals, but also with a fading frontal. What is the reason? The problem is in moisture, which remained after washing. And with this problem even those who soap the car in boxing are faced with zero temperature.

The remaining moisture in the salon overnight turns into a solid ice crust on the front. What is the way out of the situation? If glass freeze in the car from the inside, what to do? Of course, not at all wash the car to the May warming is not an option. Experts recommend to air the interior of the car immediately after washing. And this is not in boxing (since the humidity is always 100 percent there), but on the street. It is enough to drive the car to the site and open the laser all the doors. After 10-15 minutes, it is possible to start everyday operation.

How to make glasses in the car do not frozen

With the onset of frosts, many car owners begin to face a common problem, or rather with the freezing of the car from the inside. It is worth noting that this fact does not only cause some difficulties with the morning preparation of the car to operate, but can also cause an emergency. The fact is that some drivers are lazy to completely clean the glass from the land, or do not wait for a complete warm-up of the cabin and thawing the glasses, and they are satisfied with a small window in the windshield. And on the side and at all do not pay attention.

Each is known, but few people think that driving conditions with a limited review may significantly affect the safety of motion, and an adequate response in the emergency atmosphere. The fact is that in these conditions, the driver cannot see the full situation on the road, and therefore, adequately react to the situation. Therefore, in this article, we will consider in detail ways to combat the freezing of automotive glasses.

Separately, it is possible to remember that most modern cars are effectively coping with frozen glasses, but it still takes some time, especially in severe frosts. That is, each car (except rarity) has a stove with a fan in its design, which allows you to carry out windshield blowing. But there is a need to wait for the complete warm-up of the motor, and then wait for the thawing of the windshield and side glasses. Also, in some models of machines, optionally there is an electric heating of windshield, but it is worth considering that it has low power, and also for a long time heats the glass into severe frosts. Therefore, it is better to exclude the reasons for the appearance of the frost on the glasses, or to use a heated garage, in which the appearance of icing is impossible.

Why appears Flash on automotive glasses

Before moving towards the methods of dealing with Founding on the glasses, it is necessary to understand the process itself. Everyone should understand that this is due to the temperature difference between the environment and the car's interior. Or rather, due to the fact that the car stops and turns off the stove, the temperature begins to fall in the cabin, and reaching a negative mark, moisture in the air, begins to actively crystallize, falling onto the automotive glasses.

Looking ahead, we note that the flight formed on the glass is difficult to remove, and if you use mechanical methods for cleaning the glass, that is, a chance to damage it. In this case, you will have to come to terms with the presence of scratches on the glass, or contact the specialists who can stick and polish damage. Flame itself, it is formed on the glasses, and not on other elements of the cabin, due to the high thermal conductivity coefficient, especially, in comparison with other materials used in the car. Therefore, it is on glass, faster and more decreases temperature. Remembering the school course of physics, it is on the glass that will undergo a crystallization reaction with the lowest energy costs, especially, the oblique location of the windshield - further contributes to the formation of a land.

Therefore, having come to the car with early winter in the morning. It can be found that the floor was formed solely on the windshield, and as you could understand, there are no special wonders in this process.

The main reason for the land is the appearance of condensate on glass

As it should have been clearly understood that the root cause of land on automotive glasses, the condensate on their surface becomes, subsequently freezing. This property of moisture constantly in the air is studied in the school course of physics. But for your own understanding of the process, it is enough to breathe on the glass, and you will immediately see the resulting area with small droplets. This is due to the fact that the temperature of exhaled air is significantly higher than the surface of the glass, and the humidity is very high. Therefore, the flow of wet air, reaching the cold surface, is cooled to a temperature called a dew point, and more moisture is settled on the surface.

Therefore, if the temperature of the glass or air inside the cabin will be below 0 degrees Celsius, then water goes into a solid state and a layer of nondes or frost is formed. And so, it becomes clear now that the windows in the car freeze, due to the high humidity inside the car's cabin, and the temperature difference manifests itself to a greater extent on the glasses.

Several ways to deal with Founding when stopping the car in the parking lot

We now turn to several simple ways to combat this phenomenon, as you know, prevention is better and easier for treatment. Therefore, we consider the actions that will be removed from the appearance of the land: • To get rid of wet air from the cabin in winter, it is enough to open the windows and turn on the automotive heater to full power. Thus, the interior of the car is completely ventured and will be filled with less humid air from the environment;

• Another way is to get rid of temperature drops. For this, it is enough to leave a car with open doors for a few minutes before close it overnight. By this you will achieve the fact that the temperature outside and inside the cabin is leveled, and condensate will not form;

- The next way will save the car from the freezing of windows in any conditions. For this, it is sufficient to make a solution of alcohol and glycerin in a ratio of 10: 1, respectively, and thoroughly wipe the glass.

Elimination of high humidity in the cabin

It is high humidity that is the main reason for freezing windows in the car. But if you can fight the above-described methods with freezing, then the presence of extra moisture in the cabin may result in serious consequences for the body of the machine.

This turns out that in independence from our desire, in the winter period of time, we reluctantly enter a large number of snow on shoes and clothing. Therefore, before sitting in the car, it is desirable to tear snow from the outerwear, and cut your legs over the road. This will reduce the amount of water in the car, but will not save completely from it.

The fact is that as if we tried, but some of the snow still falls on our shoes in the salon of the car. Despite the good mats, even rubber with high sides, water can accumulate under them and even soak carpet and thermal insulation. What can lead to the appearance of corrosion and cause constant high humidity in the cabin. You can apply all the forces in order to reduce the amount of water and snow falling into the salon, but this will not give a significant result. Therefore, you will have to periodically dry the car and rugs, and it is necessary to do it in a heated room. Also, it is worth considering that the car washing in the cabin also increases moisture, because in the cold season, the interior is extremely poorly dry, and constantly closed windows do not allow to remove the accumulated moisture. Therefore, it is desirable to minimize this procedure for the winter period, or try to thoroughly dry the salon.

Another cause of high humidity can be a spoiled air filter of the cabin, which, due to long exploitation, began to skip moisture with air inside the car. In any case, this element should be changed according to the regulations, since it entails not only increased humidity, but also the risk for the appearance of diseases. After all, the medium formed on the surface of the filtering element, over time, becomes favorable for the development of microorganisms or fungi that can cause allergies or respiratory diseases.

How to deal with already frozen windows

After reading the theoretical and preventive part of our article, you can go to the next step, and decide what should be done if the windows still frozen. In this part of the text, we will not consider elementary methods. Such as the heating of the car, or the use of electrical heating of glass. Because, this is implied things, and in this article, we will consider the situation when it is not possible to take advantage of these benefits of civilization.

First of all, it is worth warming that the use of scrapers of various species is an unwanted way to deal with Founding. If you move at this method, you can scratch or damage the glass. That is not desirable, especially, knowing faster and less labor costs of getting rid of the land. To date, in any car store, special chemicals are offered, which are effectively fighting by Founding. Usually offered in aerosol cans or in spray tanks. When using special means, it suffices to spray a mixture on a frozen surface, and after a while, a rag or brush remove the resulting mass.

In the event that you do not have the opportunity to buy a special tool in the store, you can use the technical alcohol, or make a salt solution that will not be as efficient, but also helps with frost on the glasses. To do this, it is sufficient to dissolve one tablespoon of the usual table salt per liter of water, and the resulting salt solution is applied through a sprayer.

Warning

No matter how logical and simple solution to use hot water to combat ice, it can lead to sad consequences. Pawing boiling water on cold glass, it can burst due to a sharp and uneven temperature difference. What will lead to the expansion of glass only in local areas and will create an internal voltage in the material, which will lead to the destruction of the glass. Even if the glass does not burst, the water will quickly turn into ice, and you have to repeat the procedure, risking again.

Output

In fact, there is nothing terrible and difficult to get rid of the freezing of windows. Of course, the easiest way to take preventive measures, and get into a car with clean glasses. Also, you can use chemicals that prevent subsequent freezing by creating a special protective film. But it will have to do it regularly, it is easier to carry out a car before closing, or leave a small gap, open a window if the car remains in a cold garage all night.

Article author:

Cooking Dmitry.

Анонсы

Добавить комментарий